The Guarantee of Result in Skin Photorejuvenation

Slim E30 is the truly leading-edge CO2 surgical laser; by combining advanced technology with ease of use, it enables the surgeon to always obtain the very best coagulation or tissue vaporization effect in every circumstance.
Thanks to its three operating modes: continuous (CW), pulse and superpulse, Slim E30 is able to provide high power and performance at top levels and meet every operating requirement.
Gentler Laser skin resurfacing than with ER: YAG
In the Skin Resurfacing procedure the laser light is absorbed by water in the skin cells and this absorption, in turn, causes the instantaneous vaporization or destruction of the cell itself. The advanced Lasering computer scanning technology produces such a fast scan that it allows the physician to have an amazing control in order to treat only as deeply as needed. This lets the physician remove wrinkles, soft lines, and deep wrinkles in a gentler way than with ER: YAG.


Articulated arm with 7 mirrors
Fixed focal handpiece 5 "
Scanner system MiXto Sx
MiXto Sx Insert 300um
MiXto Sx Insert 180um
Spacer straight tip scan
Spacer open tip scan
Safety glasses (2pcs.)

Polarized vision enhancement system V900L
Polarized vision enhancement system V300H
Smoke evacuator BF9 SET-D

Type of Laser CO² Laser
Manufacturer LASERING SRL
Wavelength 10.6 microns
Operating Modes Continuous Wave (CW), Pulser, SuperPulse
Power CW: 0.5 – 30W
SuperPulse: 0.5 – 12W
Pulser: 5 – 25W
Exposure Modes Continuous, Single Pulse, Repeat Pulse
Aiming Beam Diode Laser (Red), 635 nm
Articulated Arm Lightweight, aluminium fiber, 7 joints spring balanced
User Interface Color TFT with Touch-screen technology
Electrical Requirements 100 - 240 Vac – 50 / 60Hz 660 VA (Max)
Dimension 35 cm (W) x 24 cm (D) x 100 cm (H)
Weight 30 kg

Spot size 180 µm, 300 µm
Laser beam Energy 1 - 480 mJ per spot
Pulse Width 2.5 msec - 16 msec (Index 8) - (Index 1)
Fractional Coverage 5, 10, 15, 20, 40% Using “Z” algorithm scan pattern
Scan Area Spot 300 µm: 6x6 - 20x20 mm
Spot 180 µm: 5x5 - 12x12 mm

Spot size 300 µm
Laser beam Energy 1 - 24 mJ
Scan Pattern Shapes Beam, Line, Rectangle, Square, Triangle, Circle, Donut
Dwell Time settings 0.1 - 0.8 msec
Scan Area Spot 300 µm: 6x6 - 20x20 mm